Skip to main content

Camera Specific Configurations

note

This page makes use of presets of FFmpeg args. For more information on presets, see the FFmpeg Presets page.

MJPEG Cameras

Note that mjpeg cameras require encoding the video into h264 for recording, and restream roles. This will use significantly more CPU than if the cameras supported h264 feeds directly. It is recommended to use the restream role to create an h264 restream and then use that as the source for ffmpeg.

go2rtc:
streams:
mjpeg_cam: ffmpeg:{your_mjpeg_stream_url}#video=h264#hardware # <- use hardware acceleration to create an h264 stream usable for other components.

cameras:
...
mjpeg_cam:
ffmpeg:
inputs:
- path: rtsp://127.0.0.1:8554/mjpeg_cam
roles:
- detect
- record

JPEG Stream Cameras

Cameras using a live changing jpeg image will need input parameters as below

input_args: preset-http-jpeg-generic

Outputting the stream will have the same args and caveats as per MJPEG Cameras

RTMP Cameras

The input parameters need to be adjusted for RTMP cameras

ffmpeg:
input_args: preset-rtmp-generic

UDP Only Cameras

If your cameras do not support TCP connections for RTSP, you can use UDP.

ffmpeg:
input_args: preset-rtsp-udp

Model/vendor specific setup

Annke C800

This camera is H.265 only. To be able to play clips on some devices (like MacOs or iPhone) the H.265 stream has to be repackaged and the audio stream has to be converted to aac. Unfortunately direct playback of in the browser is not working (yet), but the downloaded clip can be played locally.

cameras:
annkec800: # <------ Name the camera
ffmpeg:
output_args:
record: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c:v copy -tag:v hvc1 -bsf:v hevc_mp4toannexb -c:a aac
rtmp: -c:v copy -c:a aac -f flv

inputs:
- path: rtsp://user:password@camera-ip:554/H264/ch1/main/av_stream # <----- Update for your camera
roles:
- detect
- record
- rtmp
rtmp:
enabled: False # <-- RTMP should be disabled if your stream is not H264
detect:
width: # <---- update for your camera's resolution
height: # <---- update for your camera's resolution

Blue Iris RTSP Cameras

You will need to remove nobuffer flag for Blue Iris RTSP cameras

ffmpeg:
input_args: preset-rtsp-blue-iris

Reolink has older cameras (ex: 410 & 520) as well as newer camera (ex: 520a & 511wa) which support different subsets of options. In both cases using the http stream is recommended. Frigate works much better with newer reolink cameras that are setup with the below options:

If available, recommended settings are:

  • On, fluency first this sets the camera to CBR (constant bit rate)
  • Interframe Space 1x this sets the iframe interval to the same as the frame rate

According to this discussion, the http video streams seem to be the most reliable for Reolink.

go2rtc:
streams:
reolink:
- http://reolink_ip/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=username&password=password
- ffmpeg:reolink#audio=opus
reolink_sub:
- http://reolink_ip/flv?port=1935&app=bcs&stream=channel0_ext.bcs&user=username&password=password

cameras:
reolink:
ffmpeg:
inputs:
- path: rtsp://127.0.0.1:8554/reolink?video=copy&audio=aac
input_args: preset-rtsp-restream
roles:
- record
- path: rtsp://127.0.0.1:8554/reolink_sub?video=copy
input_args: preset-rtsp-restream
roles:
- detect

Unifi Protect Cameras

Unifi protect cameras require the rtspx stream to be used with go2rtc https://github.com/AlexxIT/go2rtc#source-rtsp

In the Unifi 2.0 update Unifi Protect Cameras had a change in audio sample rate which causes issues for ffmpeg. The input rate needs to be set for record and rtmp if used directly with unifi protect.

ffmpeg:
output_args:
record: preset-record-ubiquiti
rtmp: preset-rtmp-ubiquiti # recommend using go2rtc instead